Own up! Anyone out there ever worked on a GTP that really ran well?? I haven’t and in fact have never had one of these ‘go through my hands’, so it is something completely new to me altogether! Apparently the problem with this one is a ‘tight’ gearbox, which has to be looked at, since…
Anyone for GTP?
This coming week looks like being an interesting one!! ‘Pud’ has decided to let me have a go at the gearbox on his early 1939 GTP, which is a bit different for me, as I’ve never actually worked on one of these bikes, or one of these gearboxes, either (the same internals, though as the…
It’s a Hercus!!
New member of the family… Yesterday it finally happened. I’ve been pacing around like an expectant father for the last week, as I have been looking for a lathe for a while now, and last week I went to see one that finally fit the bill (or rather, the budget!). A ‘used’ looking 9” Hercus…
Trial Assembly of -10 Gearbox
Last week I was again at the powder-coater, Marshalls, and asked about a bead blaster…he recommended one not one hundred yards from him, and so I trotted off to take my gearbox-casing, now a hollow shell. He was very friendly and quite interested and seems to do lots of bike bits for people, so I…
Good or Bad Carbs+De-Chrome
No, this is not a lesson in nutrition! Yesterday I had a bit of a play and cleaned up the 276 Carby I got with the bike. Most of it is useable, needs a new slide and loads of other bits, but is looking good after a careful clean. Someone had painted it silver, presumably…
A Leica-ly Story!
I may have mentioned it before, but if I am going to take a sixty-year-old motorcycle on a tour and take photographs along the way, you can bet that I won’t be using a digital @#%$&** camera! So, I got me (excuse the language) a worthy camera built at around the same period as the…
8″ Miller HID-Conversion
Ever wondered what the world looked like at night beyond the yellow glare of the street-lamps? Now’s the time to find out and even for the let’s-keep-everything-original (well, original looking, anyway) buffs, here is a low-profile change that could save your life or someone that you love (no-one else gets to ride the bike, rest…
Paint Preparation
Today has seen much go on in the workshop. but not much that I can actually document, well… not pictorially, anyway! AS time goes on, I suppose I could try out my video-skills and show how I was doing something AS I am doing it…will have to give that a go! I started off doing…
No, I haven’t bought a Honda!
… as was suggested by one of my ‘ardent’ followers of the blog! No, things have not been very conducive to blogging in the last week, in fact, there has been so much turmoil around the house and around some of the bike parts (or rather their origin and what is going to happen…
Second KSS Tank
Postwar KSS tank Ah! Due to the fact that the bike came with an MSS tank (right shape and date, but definitely ‘wrong’ underneath!) the buyer ‘hapened’ to have a ‘correcter’ tank at his place and sent it to me free of charge! Thanks for that, Robert! A nice post-war KSS tank, in fairly good,…
KA169/2 Pillion footrest rubbers
Proper rigid pillion footrests
What they look like is what you get: Correct footrest rubbers for the rigid Velocette MAC, MOV, MSS and KSS. They fit original parts using the original screws AND the patterns, too
Please let me know by email if you would like some/one of these or look for them on eBay!
Peter Gouws-
Blog Titles, Chronologically
- (S)lowly starting up again 16/11/2023
- Velocette KA169/2 Rear Footrest Rubbers for rigid frames 14/11/2023
- Little ’40s Myford 3 1/8″ ML2 01/01/2019
- Footrest/Kickstart Rubber B60/2 10/06/2014
- Brooklands day!! 23/03/2014
- Rigid Velocette Top Yokes for WEBB forks 03/03/2014
- Lycett type saddles etc. 25/02/2014
- Saved rigid MSS from Australia 01/01/2014
- Visit to Wayne… and a grumble 30/11/2013
- Relocation to the UK 10/10/2013
- GTP ‘Before and After’ Album 25/09/2013
- Rigid Velocette gearbox ‘field-strip’ 10/09/2013
- GTP all back together 01/09/2013
- Velocette Kickstart reassembly 01/09/2013
- GTP Drive-side completion 24/08/2013
- GTP Primary Chain Case re-assembly 23/08/2013
- GTP full gearbox strip-down 18/08/2013
- GTP Gearbox cure… 15/08/2013
- GTP and pre-War MOV single-plate clutch 13/08/2013
- GTP Gearbox-strip #1 10/08/2013
- Anyone for GTP? 01/08/2013
- Slight Change Of Plans! 25/07/2013
- Four-stroke cycle? Nearly! 11/06/2013
- Miller Regulator Cover and More! 04/06/2013
- Miller ‘Star’ Testimonials 26/05/2013
- When is a Switch worth a Swap? 24/05/2013
- The Waiting Game 02/04/2013
- First Production Looming 15/03/2013
- ‘Racing’ Oil Tank Anyone?? 14/03/2013
- Real Glass Miller Rear Lens? 08/03/2013
- First Stampings of the ‘Star’ 05/03/2013
- New 8″ Headlamp Brackets 18/02/2013
- Slow Wake-Up after Christmas 31/01/2013
- Summer Doldrums 23/12/2012
- 8-inch Miller Headlamp 12/12/2012
- Lucas Altette? (+ some Chrome) 07/12/2012
- Miller Rear Light Update 01/12/2012
- Going (not so) cheap 19/11/2012
- The Wheel Truth 06/11/2012
- Be-Spoke Wire-Wheel Lace-Up 28/10/2012
- Smith’s Face-Job 22/10/2012
- Bluemels Brake Plate 21/10/2012
- Webb Hub and Brake-Plate? 20/10/2012
- More Sorting Out 08/09/2012
- 1928 Model K Velocette 07/09/2012
- My Book is Published!! 24/08/2012
- Velocette Mudguards and Stays 18/08/2012
- Rear Wheel Alignment 17/08/2012
- Now Trading Officially! 20/07/2012
- A Quick 50W Update 16/07/2012
- My Startup News 16/07/2012
- Let There Be Light! 05/07/2012
- More Parts from the Painters 19/05/2012
- A Tale of Two Tanks 19/05/2012
- Split Cases? 30/04/2012
- It’s a Hercus!! 29/04/2012
- Buffed Ally Covers etc. 25/04/2012
- Trial Assembly of -10 Gearbox 25/04/2012
- Good or Bad Carbs+De-Chrome 09/04/2012
- Painted Parts and Other Things 08/04/2012
- A Leica-ly Story! 24/03/2012
- 8″ Miller HID-Conversion 17/03/2012
- Webb Bottom Links 28/02/2012
- Frame and Fork Prep 19/02/2012
- Paint Preparation 19/02/2012
- No, I haven’t bought a Honda! 16/02/2012
- 1:9 Scale Velocette Model 11/02/2012
- Second KSS Tank 07/02/2012
- More Gearbox 06/02/2012
- Box #2 05/02/2012
- Gearbox Time! 04/02/2012
- Even More (expensive) Rubbish 31/01/2012
- Quick look at my KSS 29/01/2012
- Two Boxes of Gear(s) 28/01/2012
- Engine OUT! 27/01/2012
- Head J.O.B / Fuel-Tank 22/01/2012
- My KSS arrives! 21/01/2012
- More Bits than Pieces 21/01/2012
- KSS Cylinder-Head & Gears 21/01/2012
- Matching Numbers? 09/01/2012
- MAC / Bike-Work-Bench 04/01/2012
- Change of course 22/12/2011
- Inventory of Needed MAC Parts 17/12/2011
- The Bike Has Come, the Walrus Said 16/12/2011
- Transport Paid and Ready To Go! 08/12/2011
- More photos of the MAC 08/12/2011
- I Finally Found a Bike! 07/12/2011
- Looking for a Project Object 01/12/2011
- The Journey to Bielefed, Germany 26/11/2011
- Bike Pick Up and the Way Home 25/11/2011
- 1956 Matchless G80S 25/11/2011
- How it SHOULD have started 23/11/2011
Tags
'Racing' parts 8" Headlamp 1939-1955 Bad Copy Classic Bikes Cleaning up Controls Doldrums Finishing Good Copy KSS LE Legal Requirements MAC Manufacture Matchless Miller Miller 36E misterpeter MOV MSS Mythology New Parts New Skills Old Skills Originality Original Parts Pattern parts Pile of bits Rear Light Repairs Replacement Parts Reproduction Horrors Rigid Rudge Stainless STOP Trial Reassembly Velocette Velocette GTP Vincent Vintage Bikes WEBB Wheel-Building ГТП коробкой передач