Old lid with new internals (no bracket yet!) How time flies!! I am still stuck up here at my parent’s place, camping on an air-mattress that decided to deflate twice last night (No, not the subject of another blog, sorry!) and am sitting right now at what has, for the last eight months, been my…
Miller ‘Star’ Testimonials
My humble thanks! To start on a really positive note, I have had some fantastic feedback about the Star, my proudly first ‘product’! I humbly accept their praise and encouragement, as a good deal of work (and money) gets sunk into such projects. This sort of praise makes it all worthwhile, when you know that…
First Production Looming
Well, it should have sort of sifted through by now… … I’m not only restoring a Velocette blah,blah, blah, but I’m also setting myself up as a sort of modern-day Don Qixote, Jousting with windmills etc. in my efforts to redress the balance and make parts that FIT, DO THE JOB they were intended for…
First Stampings of the ‘Star’
Yep, the day has arrived, when I can see the results of my first ‘remote’ job being completed. As an industrial pattern-maker, my main line is making ‘wooden’ patterns for castings (not always really wooden and these days I’m working hard on some CAD to get stuff CNC’d). Due to a change in family circumstances,…
8-inch Miller Headlamp
How good are the copies? Well, I have the undoubted pleasure of owning an original Miller lamp shell, with an original ammeter and switch, (the ammeter pictured above is a cheap pattern which doesn’t fit…) although the switch is a later, three-position job, as available now ‘everywhere’ in pattern form; where from I don’t know…probably…
Let There Be Light!
And By GOLLY, there WAS! My goodness, how time flies! Has it really been six weeks since I did a blog! Unforgivable! Lots has been going on, I must admit, so I sort of forgive myself, even if you don’t! One of my preoccupations has been with lighting. I managed to find someone willing to…
More Parts from the Painters
All sorts of ‘goodies’! The last two weeks have passed like lightning, as just one or two changes have occurred and there have been new plans afoot, a few parts have been returned from various ‘service providers’ and Christmas has come early this year, too! In Australia, we often see ‘Christmas in July’ parties, but…
8″ Miller HID-Conversion
Ever wondered what the world looked like at night beyond the yellow glare of the street-lamps? Now’s the time to find out and even for the let’s-keep-everything-original (well, original looking, anyway) buffs, here is a low-profile change that could save your life or someone that you love (no-one else gets to ride the bike, rest…
More Gearbox
More questions and comparisons As I noted yesterday, there are some strange things going on in these two gearboxes… I’ll start with the main-shaft again and the differences in the sleeve-gear and the shafts themselves: The picture above is of the ends of the sleeves at the clutch end, without the shaft in situ, and…
KA169/2 Pillion footrest rubbers
Proper rigid pillion footrests
What they look like is what you get: Correct footrest rubbers for the rigid Velocette MAC, MOV, MSS and KSS. They fit original parts using the original screws AND the patterns, too
Please let me know by email if you would like some/one of these or look for them on eBay!
Peter Gouws-
Blog Titles, Chronologically
- (S)lowly starting up again 16/11/2023
- Velocette KA169/2 Rear Footrest Rubbers for rigid frames 14/11/2023
- Little ’40s Myford 3 1/8″ ML2 01/01/2019
- Footrest/Kickstart Rubber B60/2 10/06/2014
- Brooklands day!! 23/03/2014
- Rigid Velocette Top Yokes for WEBB forks 03/03/2014
- Lycett type saddles etc. 25/02/2014
- Saved rigid MSS from Australia 01/01/2014
- Visit to Wayne… and a grumble 30/11/2013
- Relocation to the UK 10/10/2013
- GTP ‘Before and After’ Album 25/09/2013
- Rigid Velocette gearbox ‘field-strip’ 10/09/2013
- GTP all back together 01/09/2013
- Velocette Kickstart reassembly 01/09/2013
- GTP Drive-side completion 24/08/2013
- GTP Primary Chain Case re-assembly 23/08/2013
- GTP full gearbox strip-down 18/08/2013
- GTP Gearbox cure… 15/08/2013
- GTP and pre-War MOV single-plate clutch 13/08/2013
- GTP Gearbox-strip #1 10/08/2013
- Anyone for GTP? 01/08/2013
- Slight Change Of Plans! 25/07/2013
- Four-stroke cycle? Nearly! 11/06/2013
- Miller Regulator Cover and More! 04/06/2013
- Miller ‘Star’ Testimonials 26/05/2013
- When is a Switch worth a Swap? 24/05/2013
- The Waiting Game 02/04/2013
- First Production Looming 15/03/2013
- ‘Racing’ Oil Tank Anyone?? 14/03/2013
- Real Glass Miller Rear Lens? 08/03/2013
- First Stampings of the ‘Star’ 05/03/2013
- New 8″ Headlamp Brackets 18/02/2013
- Slow Wake-Up after Christmas 31/01/2013
- Summer Doldrums 23/12/2012
- 8-inch Miller Headlamp 12/12/2012
- Lucas Altette? (+ some Chrome) 07/12/2012
- Miller Rear Light Update 01/12/2012
- Going (not so) cheap 19/11/2012
- The Wheel Truth 06/11/2012
- Be-Spoke Wire-Wheel Lace-Up 28/10/2012
- Smith’s Face-Job 22/10/2012
- Bluemels Brake Plate 21/10/2012
- Webb Hub and Brake-Plate? 20/10/2012
- More Sorting Out 08/09/2012
- 1928 Model K Velocette 07/09/2012
- My Book is Published!! 24/08/2012
- Velocette Mudguards and Stays 18/08/2012
- Rear Wheel Alignment 17/08/2012
- Now Trading Officially! 20/07/2012
- A Quick 50W Update 16/07/2012
- My Startup News 16/07/2012
- Let There Be Light! 05/07/2012
- More Parts from the Painters 19/05/2012
- A Tale of Two Tanks 19/05/2012
- Split Cases? 30/04/2012
- It’s a Hercus!! 29/04/2012
- Buffed Ally Covers etc. 25/04/2012
- Trial Assembly of -10 Gearbox 25/04/2012
- Good or Bad Carbs+De-Chrome 09/04/2012
- Painted Parts and Other Things 08/04/2012
- A Leica-ly Story! 24/03/2012
- 8″ Miller HID-Conversion 17/03/2012
- Webb Bottom Links 28/02/2012
- Frame and Fork Prep 19/02/2012
- Paint Preparation 19/02/2012
- No, I haven’t bought a Honda! 16/02/2012
- 1:9 Scale Velocette Model 11/02/2012
- Second KSS Tank 07/02/2012
- More Gearbox 06/02/2012
- Box #2 05/02/2012
- Gearbox Time! 04/02/2012
- Even More (expensive) Rubbish 31/01/2012
- Quick look at my KSS 29/01/2012
- Two Boxes of Gear(s) 28/01/2012
- Engine OUT! 27/01/2012
- Head J.O.B / Fuel-Tank 22/01/2012
- My KSS arrives! 21/01/2012
- More Bits than Pieces 21/01/2012
- KSS Cylinder-Head & Gears 21/01/2012
- Matching Numbers? 09/01/2012
- MAC / Bike-Work-Bench 04/01/2012
- Change of course 22/12/2011
- Inventory of Needed MAC Parts 17/12/2011
- The Bike Has Come, the Walrus Said 16/12/2011
- Transport Paid and Ready To Go! 08/12/2011
- More photos of the MAC 08/12/2011
- I Finally Found a Bike! 07/12/2011
- Looking for a Project Object 01/12/2011
- The Journey to Bielefed, Germany 26/11/2011
- Bike Pick Up and the Way Home 25/11/2011
- 1956 Matchless G80S 25/11/2011
- How it SHOULD have started 23/11/2011
Tags
'Racing' parts 8" Headlamp 1939-1955 Bad Copy Classic Bikes Cleaning up Controls Doldrums Finishing Good Copy KSS LE Legal Requirements MAC Manufacture Matchless Miller Miller 36E misterpeter MOV MSS Mythology New Parts New Skills Old Skills Originality Original Parts Pattern parts Pile of bits Rear Light Repairs Replacement Parts Reproduction Horrors Rigid Rudge Stainless STOP Trial Reassembly Velocette Velocette GTP Vincent Vintage Bikes WEBB Wheel-Building ГТП коробкой передач